A burst supply line, an overflowing tub, or a storm surge under the back door doesn't wait for business hours, and neither do we. Hirex Water Damage sends licensed technicians straight to your Bath address with extraction equipment already loaded and running.
Hirex Water Damage started because homeowners in Bath, ME kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Bath roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our crew leads carry IICRC water restoration certifications and have logged real hours on Category 1, 2, and 3 losses, so Water Damage Repair in Bath isn't a side service we tacked on — it's the reason the company exists. We're fully insured and licensed to work anywhere in Bath, ME, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside Bath, ME so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Ask any Bath property manager who has dealt with a burst supply line at 3am — the difference between a crew that shows up ready and one still loading a truck at the shop is measured in gallons of water soaking into your subfloor. That's the gap Hirex Water Damage was built to close, one Bath call at a time.
Not every leak announces itself with a flooded floor. A lot of the worst damage we see in Bath started small and got ignored for weeks. Here's what tells us a property needs professional attention rather than a mop and a fan:
If any of that sounds familiar, don't wait for it to get worse — call our Bath line and we'll tell you honestly whether it's a same-day emergency or something we can schedule.
Whether it's one bedroom carpet or an entire flooded commercial floor, our Bath crews scale the response to match the loss — nothing gets a cookie-cutter response.
Our Bath units run truck-mount extraction pumps that pull thousands of gallons per hour, cutting standing-water time from days to hours. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
We place industrial dehumidifiers and air movers based on actual psychrometric calculations, not a standard equipment count per room, with daily drying logs so you can see the numbers improving, not just take our word for it.
On the residential side in Bath, we handle the flood-cut, subfloor checks, and content pack-out so your home is ready to rebuild, with clear photo documentation at every stage for your insurance claim.
Multi-unit and commercial Bath properties get their own project manager plus enough drying equipment to cover the real square footage, not a token setup — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Category 3 blackwater calls for full PPE, antimicrobial treatment, and disposal of anything porous that touched the contamination — our Bath crews are trained for exactly that protocol.
On top of standard drying, our Bath crews treat affected materials to reduce mold risk and will be upfront if a section needs specialist remediation.
You get a written estimate before any equipment runs, not a mystery total handed to you after the fact.
Our Bath, ME warehouse keeps drying equipment close, which typically puts a Bath tech at your door inside an hour.
We document everything with photos and moisture logs and work directly with your adjuster so you're not stuck translating restoration jargon.
We don't call a job finished until the moisture meter agrees, and if it doesn't, we return at no additional cost.
Tell our Bath dispatcher what's happening — we'll ask a few quick questions to send the right equipment on the first trip.
A licensed technician heads to your Bath address with extraction and drying equipment already loaded.
We remove standing water first, then map moisture and position air movers and dehumidifiers based on the readings.
We re-check moisture levels daily until materials hit dry standard, then hand you full documentation for your records or your insurer.
Every Bath job gets closed based on instrument readings, not a visual check, and we won't call it finished until the numbers say it's finished. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
That's not a marketing line — it's written into every Bath work order we issue. A repeat visit under this guarantee doesn't mean starting over — we pull the original moisture logs and pick up exactly where the last visit left off.
"We had standing water from a burst water heater and the technician showed up before I even finished mopping the entry way." — Danielle R.
"The team handled every conversation with my adjuster — I never had to explain what psychrometrics meant to anyone." — Marcus T.
"They showed me the daily moisture readings so I wasn't just trusting a stranger's word that the house was dry." — Priya S.
"A supply line failure flooded our kitchen and this crew had us reopened in under a week — much faster than we expected." — Aaron W.
"Nobody wants to call about a sewage backup, but they walked me through the containment and PPE process calmly." — Lena G.
"What they quoted up front is what I paid. No hidden equipment fees." — Sam O.
Because our equipment is staged inside Bath, ME, most Bath calls see a technician on-site within 60 to 90 minutes of the initial call.
Upfront, written pricing is standard on every Bath job, not an add-on option.
Emergency extraction, structural drying, and sewage/contaminated water cleanup are all available 24/7 for Bath properties.
Direct adjuster communication is standard — we send photo and moisture documentation formatted for a Bath insurance claim.
We take moisture meter readings on affected materials and compare them against the dry standard for that material type — a visual check alone isn't enough.
Yes, our Bath crews are trained and equipped for Category 3 blackwater response, including PPE and antimicrobial treatment.
Cut power to the affected area if there's standing water near outlets, and avoid walking through it until our Bath tech confirms it's safe.
Yes, we regularly respond to commercial and multi-unit losses in Bath, including retail, restaurants, and office space.
Most Bath residential jobs dry out in 3 to 5 days depending on how much material got wet and how long it sat before extraction.
Not if it's addressed quickly — mold generally needs 24-48 hours of sustained moisture, which is exactly why fast extraction matters.
Yes, if moisture readings aren't at dry standard when we finish, or a callback shows lingering moisture within 30 days, we return at no extra charge.
See the zip codes and nearby cities listed below — our Bath crews cover that full radius.
Beyond Bath itself, our coverage extends across nearby zip codes, with additional Bath, ME crews available for large-scale or commercial losses. If your address falls inside or near Bath, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Bath, Bath, MECall now and speak with a real Bath dispatcher, not a national call center.
Call +1-844-578-1604